SORT BY
  1. 19-SGSS-4 Swaged Stainless Steel Grating
    19-SGSS-4 Swaged Stainless Steel Grating

    19SGSS4 Light Duty Stainless Steel Swaged Bar Grating is a pressure locked type grating made by the swaging process used for pedestrian traffic only and made per order. Panels are manufactured to 2’ and 3’ widths, while providing standard lengths up to 24’ long. 19SGSS4 Light Duty Stainless Steel Swaged Bar Grating is available in bearing bar sizes ranging from 3/4" to 2 1/2" depths and thicknesses of 3/16” and 1/8”. 19SGSS4 is spaced 1-3/16” c.c. for the bearing bars and 4” c.c. for the cross bars. Stainless Steel comes in type 304 and 316 alloys. Typical applications include: catwalks, platforms, pedestrian trenches, pedestrian sump pits, stair treads, water and sewage treatment facilities, waste water treatment plants, food processing, corrosive environments, and marine environments. Surface options are smooth or serrated. Stainless Steel comes in a mill finish and a sandblasted finish.

    VIEW ALL
  2. 19-SGSS-2 Swaged Stainless Steel Grating
    19-SGSS-2 Swaged Stainless Steel Grating

    19SGSS2 Light Duty Stainless Steel Swaged Bar Grating is a pressure locked type grating made by the swaging process used for pedestrian traffic only and made per order. Panels are manufactured to 2’ and 3’ widths, while providing standard lengths up to 24’ long. 19SGSS2 Light Duty Stainless Steel Swaged Bar Grating is available in bearing bar sizes ranging from 3/4" to 2 1/2" depths and thicknesses of 3/16” and 1/8”. 19SGSS2 is spaced 1-3/16” c.c. for the bearing bars and 2” c.c. for the cross bars. Stainless Steel comes in type 304 and 316 alloys. Typical applications include: catwalks, platforms, pedestrian trenches, pedestrian sump pits, stair treads, water and sewage treatment facilities, waste water treatment plants, food processing, corrosive environments, and marine environments. Surface options are smooth or serrated. Stainless Steel comes in a mill finish and a sandblasted finish. Note: 2” cross bar spacing is normally a non-stock item and increases price/lead time. This product also carries the same load capacity of a 4” cross bar spacing but does provide a tighter opening.

    VIEW ALL
  3. 15-SGSS-4 Swaged Stainless Steel Grating
    15-SGSS-4 Swaged Stainless Steel Grating

    15SGSS4 Light Duty Stainless Steel Swaged Bar Grating is a pressure locked type grating made by the swaging process used for pedestrian traffic only and made per order. Panels are manufactured to 2’ and 3’ widths, while providing standard lengths up to 24’ long. 15SGSS4 Light Duty Stainless Steel Swaged Bar Grating is available in bearing bar sizes ranging from 3/4" to 2 1/2" depths and thickness of 3/16”. 15SGSS4 is spaced 15/16” c.c. for the bearing bars and 4” c.c. for the cross bars. Stainless Steel comes in type 304 and 316 alloys. Typical applications include: catwalks, platforms, pedestrian trenches, pedestrian sump pits, stair treads, water and sewage treatment facilities, waste water treatment plants, food processing, corrosive environments, and marine environments. Surface options are smooth or serrated. Stainless Steel comes in a mill finish and a sandblasted finish.

    VIEW ALL
  4. 15-SGSS-2 Swaged Stainless Steel Grating
    15-SGSS-2 Swaged Stainless Steel Grating

    15SGSS2 Light Duty Stainless Steel Swaged Bar Grating is a pressure locked type grating made by the swaging process used for pedestrian traffic only and made per order. Panels are manufactured to 2’ and 3’ widths, while providing standard lengths up to 24’ long. 15SGSS2 Light Duty Stainless Steel Swaged Bar Grating is available in bearing bar sizes ranging from 3/4" to 2 1/2" depths and thickness of 3/16”. 15SGSS2 is spaced 15/16” c.c. for the bearing bars and 2” c.c. for the cross bars. Stainless Steel comes in type 304 and 316 alloys. Typical applications include: catwalks, platforms, pedestrian trenches, pedestrian sump pits, stair treads, water and sewage treatment facilities, waste water treatment plants, food processing, corrosive environments, and marine environments. Surface options are smooth or serrated. Stainless Steel comes in a mill finish and a sandblasted finish. Note: 2” cross bar spacing is normally a non-stock item and increases price/lead time. This product also carries the same load capacity of a 4” cross bar spacing but does provide a tighter opening.

    VIEW ALL
  5. 11-SGSS-4 Swaged Stainless Steel Grating
    11-SGSS-4 Swaged Stainless Steel Grating

    11SGSS4 Light Duty Stainless Steel Swaged Bar Grating is a pressure locked type grating made by the swaging process used for pedestrian traffic only and is ADA approved; made per order. Panels are manufactured to 2’ and 3’ widths, while providing standard lengths up to 24’ long. 11SGSS4 Light Duty Stainless Steel Swaged Bar Grating is available in bearing bar sizes ranging from 3/4" to 2 1/2" depths and thickness of 3/16”. 11SGSS4 is spaced 11/16” c.c. for the bearing bars and 4” c.c. for the cross bars. Stainless Steel comes in type 304 and 316 alloys. Typical applications include: catwalks, platforms, pedestrian trenches, pedestrian sump pits, stair treads, water and sewage treatment facilities, waste water treatment plants, food processing, corrosive environments, and marine environments. Surface options are smooth or serrated. Stainless Steel comes in a mill finish and a sandblasted finish. 

    VIEW ALL
  6. 11-SGSS-2 Swaged Stainless Steel Grating
    11-SGSS-2 Swaged Stainless Steel Grating

    11SGSS2 Light Duty Stainless Steel Swaged Bar Grating is a pressure locked type grating made by the swaging process used for pedestrian traffic only and is ADA approved; made per order. Panels are manufactured to 2’ and 3’ widths, while providing standard lengths up to 24’ long. 11SGSS2 Light Duty Stainless Steel Swaged Bar Grating is available in bearing bar sizes ranging from 3/4" to 2 1/2" depths and thickness of 3/16”. 11SGSS2 is spaced 11/16” c.c. for the bearing bars and 2” c.c. for the cross bars. Stainless Steel comes in type 304 and 316 alloys. Typical applications include: catwalks, platforms, pedestrian trenches, pedestrian sump pits, stair treads, water and sewage treatment facilities, waste water treatment plants, food processing, corrosive environments, and marine environments. Surface options are smooth or serrated. Stainless Steel comes in a mill finish and a sandblasted finish. Note: 2” cross bar spacing is normally a non-stock item and increases price/lead time. This product also carries the same load capacity of a 4” cross bar spacing but does provide a tighter opening.

    VIEW ALL
  7. 7-SGSS-4 Swaged Stainless Steel Grating
    7-SGSS-4 Swaged Stainless Steel Grating

    7SGSS4 Light Duty Stainless Steel Swaged Bar Grating is a pressure locked type grating made by the swaging process used for pedestrian traffic only and is ADA approved; made per order. Panels are manufactured to 2’ and 3’ widths, while providing standard lengths up to 24’ long. 7SGSS4 Light Duty Stainless Steel Swaged Bar Grating is available in bearing bar sizes ranging from 3/4" to 2 1/2" depths and thickness of 3/16”. 7SGSS4 is spaced 7/16” c.c. for the bearing bars and 4” c.c. for the cross bars. Stainless Steel comes in type 304 and 316 alloys. Typical applications include: catwalks, platforms, pedestrian trenches, pedestrian sump pits, stair treads, water and sewage treatment facilities, waste water treatment plants, food processing, corrosive environments, and marine environments. Surface options are smooth or serrated. Stainless Steel comes in a mill finish and a sandblasted finish. 

    VIEW ALL
  8. 7-SGSS-2 Swaged Stainless Steel Grating
    7-SGSS-2 Swaged Stainless Steel Grating

    7SGSS2 Light Duty Stainless Steel Swaged Bar Grating is a pressure locked type grating made by the swaging process used for pedestrian traffic only and is ADA approved; made per order. Panels are manufactured to 2’ and 3’ widths, while providing standard lengths up to 24’ long. 7SGSS2 Light Duty Stainless Steel Swaged Bar Grating is available in bearing bar sizes ranging from 3/4" to 2 1/2" depths and thickness of 3/16”. 7SGSS2 is spaced 7/16” c.c. for the bearing bars and 2” c.c. for the cross bars. Stainless Steel comes in type 304 and 316 alloys. Typical applications include: catwalks, platforms, pedestrian trenches, pedestrian sump pits, stair treads, water and sewage treatment facilities, waste water treatment plants, food processing, corrosive environments, and marine environments. Surface options are smooth or serrated. Stainless Steel comes in a mill finish and a sandblasted finish. Note: 2” cross bar spacing is normally a non-stock item and increases price/lead time. This product also carries the same load capacity of a 4” cross bar spacing but does provide a tighter opening.

    VIEW ALL

Swaged Stainless Steel Grating

Contact A Technical Advisor

Request A Quote Today.

Request a Quote
  • Nomma
  • Naam

We are Indiana Gratings Inc.

The mission of Indiana Gratings Inc. is to be recognized as the premier gratings supplier in the industry for the Midwest and Southeastern United States and to be the benchmark others strive to achieve. We, as a team, are committed to meet the agreed upon requirements of our customers by measuring and improving our work processes.

Indiana Gratings, Inc. is located in Martinsville, Indiana with over 35,000 square feet of manufacturing area. It is a financially strong; family owned company.

About us

The Premier grating supplier for the
Midwest and southeastern United States

Providing proven quality and craftsmanship for a variety of applications

HAVE A QUESTION?

CONTACT ONE OF OUR TECHNICAL ADVISORS.